Konfiguracja HALNy HL-4GMV dla OLT Huawei MA5600/MA5683T/MA5800-X15

Tematy związane ze z urządzeniami HALNy Networks
aBaZ
Entuzjasta
Posty: 425
Rejestracja: 11 sty 2018, 16:50

Konfiguracja HALNy HL-4GMV dla OLT Huawei MA5600/MA5683T/MA5800-X15

Post autor: aBaZ » 27 lip 2020, 16:18

Poniżej konfiguracja HL-4GMV dla OLT Huawei MA5600/MA5683T/MA5800-X15 (MA5600V800R017C10)

image-4 (1).png
image-4 (1).png (93.38 KiB) Przejrzano 5350 razy

ONT został podłączony do portu GPON 1 (slot 0) z ONU_ID 13
W przykładowej konfiguracji użyliśmy poniżej sieci VLAN:
VLAN 100 - INTERNET
VLAN 200 - IPTV (multicast uplink port 0/7/0)
VLAN 300 - VOIP
VLAN 400 - MGMT

1. Tworzenie profilu DBA

Kod: Zaznacz cały

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000
2. Tworzenie srvprofile

Kod: Zaznacz cały

MA5683T(config)#ont-srvprofile gpon profile-id 130 profile-name "HL-4GMV"
  ont-port pots 2 eth 4
  igmp-forward translation 200
  multicast-forward tag transparent
  port vlan iphost translation 400 user-vlan 400
  commit


3. Tworzenie lineprofile

Kod: Zaznacz cały

MA5683T(config)#ont-lineprofile gpon profile-id 130 profile-name "HL-4GMV"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit
4. Rejestrowanie ONT na OLT

Kod: Zaznacz cały

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 13 sn-auth "48414C4E206FFFE0" omci ont-lineprofile-id 130 ont-srvprofile-id 130 desc "HL-4GMV"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 13 dhcp vlan 400 priority 0
5. Tworzenie bbs-config

Kod: Zaznacz cały

MA5683T(config)#service-port 53 vlan 100 gpon 0/0/1 ont 13 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 54 vlan 200 gpon 0/0/1 ont 13 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 55 vlan 300 gpon 0/0/1 ont 13 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 56 vlan 400 gpon 0/0/1 ont 13 gemport 3 multi-service user-vlan 400 tag-transform translate
6. Tworzenie btv-config

Kod: Zaznacz cały

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 54 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 54
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent
7. Sprawdzanie adresu IP na ONT

Kod: Zaznacz cały

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.61.132
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F6F-FF98
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------
LinuX is not an alternative, LinuX is the Future!

ODPOWIEDZ